With all the new concern about mold growing in our homes in our businesses, you may be wondering just what you can do to determine whether mold exists on your property or not. There are a few different ways to know if mold exists on your property and one of the best ones is to purchase a mold testing kit that you can perform by yourself, but how do you know if you need to test for it?
Do you throw wet clothing and towels on the floor and leave them there? Or even worse, throw dry clothing on top of them and forget the wet clothes are underneath? If this is a habit for you or the rest of your family, especially if the floor you are putting these on is carpeted, then you are inviting mold to start growing in your house. Wash wet clothing as soon as possible or put them in a sink or other container by themselves and never put dry clothing on top of wet.
Has your home suffered water damage due to floods or heavy rain? Mold likes to grow on items that have been wet and forgotten about or just never repaired. It will grow anywhere that there is moisture or high amounts of humidity. Stachybotrys mold in particular likes to grow where there is standing water, such as in a leaky area of your basement. Try to keep the humidity level in your house down and if you see condensation on your windows or on exposed pipes, you are not succeeding in this. Try a de-humidifier.
Any part of your home that has been water damaged, especially floors and walls, could be hiding a mold infestation. To detect mold that you cannot see or smell, purchase a mold testing kit and follow the directions for it exactly as they appear or the test will be useless.
Mold will also grow in closets that have too many clothes packed in them. Air simply cannot circulate in a closet packed too tight and the clothing provides all the food that the mold needs to survive. A solution to this problem is to just give or throw away clothing that you do not need and if there is not much clothing that you do not use, find another way to store it.
Leaking water pipes or even a waterline for the icemaker on your fridge can be hidden causes for this terrible menace. Check the basics and you can help to eliminate the problem before it starts.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Friday, September 28, 2007
How to Effectively Clean Out Your Fridge
The refrigerator is an important center of the household and as such, you would think that people would remember to keep these food centers cleaned more often than they tend to. Even though it is fairly cool inside, mold can still grow very well in these cool temperatures, as anyone who has opened a jar of spoiled grape jelly can surely tell you. Whether it is a jar of grape jelly or a casserole left in the fridge for a bit too long, mold can grow on anything in your refrigerator that it can get onto. This includes, well… just about everything that is not completely sealed up, such as home-canned goods that have not had their seals broken. Mold spores are everywhere and in the air we breathe, unless the air is purified, such as in a hospital or laboratory clean room, so it is fairly hard to keep mold completely off of something we do not want it on, but it can be done. It just takes a little effort. Cleaning out your refrigerator and knowing what to do with moldy food (some of it can be saved, believe it or not) is essential to keeping a healthy kitchen.
Take everything out of your refrigerator and put it either on your kitchen table or on the counters for you to deal with later. You will go through these items after you are finished cleaning out the inside of your refrigerator.
Remove all drawers, shelves, and racks so that you can wash them in the sink in whatever household chemical you have chosen for this task. Whether it is anti-bacterial soap, bleach, or even better, a chemical made specifically to kill mold, use plenty of it, but do not mix chemicals, especially bleach. If you do use bleach, do your best not to get it on your hands. Wear rubber gloves.
Wash the inside of the refrigerator with a sponge or a rag thoroughly. To get some things that might be stuck to the wall of the fridge or stuck to a shelf off, let some warm water and some of the chemical you have chosen soak on it a few minutes. After you are done with the inside of the refrigerator, wash the parts that you removed, dry them, and replace them.
As for the food you took out, put back everything that is not contaminated with mold. Anything with a high moisture content that is contaminated like sour cream or jelly must be thrown away. Blocks of cheese or dense items like hard salami can have the molded parts cut out and thrown away. Cut 1 inch around and one inch under the molded part(s), remove, and discard. The rest is usable.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Take everything out of your refrigerator and put it either on your kitchen table or on the counters for you to deal with later. You will go through these items after you are finished cleaning out the inside of your refrigerator.
Remove all drawers, shelves, and racks so that you can wash them in the sink in whatever household chemical you have chosen for this task. Whether it is anti-bacterial soap, bleach, or even better, a chemical made specifically to kill mold, use plenty of it, but do not mix chemicals, especially bleach. If you do use bleach, do your best not to get it on your hands. Wear rubber gloves.
Wash the inside of the refrigerator with a sponge or a rag thoroughly. To get some things that might be stuck to the wall of the fridge or stuck to a shelf off, let some warm water and some of the chemical you have chosen soak on it a few minutes. After you are done with the inside of the refrigerator, wash the parts that you removed, dry them, and replace them.
As for the food you took out, put back everything that is not contaminated with mold. Anything with a high moisture content that is contaminated like sour cream or jelly must be thrown away. Blocks of cheese or dense items like hard salami can have the molded parts cut out and thrown away. Cut 1 inch around and one inch under the molded part(s), remove, and discard. The rest is usable.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Home Canned Food and Mold.
Most of us like homegrown and prepared food, but sometimes when we can them in glass containers when we have too much garden produce to eat or too much to just give away, it does not all go according to plan. There are some tried and true canning techniques that have been in use in the past century or more, but sometimes we forget to use common sense when we are canning and this can lead to mold contamination in our food that we worked so hard to prepare and preserve.
We like to can our own food because we know exactly what chemicals and pesticides are going into it. Most of us do not like the idea of chemicals being put onto our food, even if they are deemed “safe” by the government or FDA. Sometimes the chemicals that they say are safe today are not safe tomorrow. But, mold contamination can be just as dangerous as any pesticide or preservative and there are a few things that you can do as a home canner to prevent this from happening to your canned items.
Make sure that the fruits and vegetables that you are canning are of the best quality from your garden. If they have any bad spots on them, cut these off or simply do not can them. Fruits and vegetables need to be washed and some need to be peeled before you can them. Starting with good quality ingredients is key.
Do not pack the food too tightly into the jars that you will can them in. The food in the center does not get to the high temperature that it needs to in order to kill bacteria and mold spores. You should pack food loosely, with at least a few inches from the top of the jar, depending on the size that you are canning in.
After you fill the jars, put the lids and the bands on. Start processing the food immediately so that mold and bacteria do not have a chance to start growing. If mold spores get into the jar, you might have a problem, because sometimes high temperatures just do not kill mold spores. Make sure any equipment that you use is completely sterile.
If you do happen to find mold growing in a jar after you open it, just throw it away. Foods that have a high amount of moisture are not salvageable when they become contaminated.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
We like to can our own food because we know exactly what chemicals and pesticides are going into it. Most of us do not like the idea of chemicals being put onto our food, even if they are deemed “safe” by the government or FDA. Sometimes the chemicals that they say are safe today are not safe tomorrow. But, mold contamination can be just as dangerous as any pesticide or preservative and there are a few things that you can do as a home canner to prevent this from happening to your canned items.
Make sure that the fruits and vegetables that you are canning are of the best quality from your garden. If they have any bad spots on them, cut these off or simply do not can them. Fruits and vegetables need to be washed and some need to be peeled before you can them. Starting with good quality ingredients is key.
Do not pack the food too tightly into the jars that you will can them in. The food in the center does not get to the high temperature that it needs to in order to kill bacteria and mold spores. You should pack food loosely, with at least a few inches from the top of the jar, depending on the size that you are canning in.
After you fill the jars, put the lids and the bands on. Start processing the food immediately so that mold and bacteria do not have a chance to start growing. If mold spores get into the jar, you might have a problem, because sometimes high temperatures just do not kill mold spores. Make sure any equipment that you use is completely sterile.
If you do happen to find mold growing in a jar after you open it, just throw it away. Foods that have a high amount of moisture are not salvageable when they become contaminated.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
Subscribe to:
Posts (Atom)
